Ranger Raptor Mods: Five Upgrades Worth Your Money
A stock Ranger Raptor is a ripper of a ute. Then you add gear, a fridge and a few weekends away, it gets even better. These Ranger Raptor mods are the ones we fit at our Brisbane workshop, ordered from the easiest to the most involved. Start wherever your ute is at today.

Load Lid: Lock Your Gear Away
Even a stock Raptor can use a load lid. It is the simplest upgrade here, and it fixes the first problem every tub owner has: what do I do with my stuff when I walk away? The Utemaster MK2 Load-Lid is a lightweight aluminium hard lid made for the next-gen Ranger. It locks, so your tools stay put at the job site, and a locking plate under the handle adds another layer of security.
Got a fridge in the back? Lock that away too. Rain channels and full weather seals keep everything dry. It bolts to the factory tub mounting points with no drilling, so it comes off clean if you sell the ute. It carries 200kg on top while you drive and 400kg when you are parked, and it has a five-year warranty.
Dual Battery: Run a Fridge All Weekend
Once the tub is lockable, the next question is a fridge. Slide one in under the lid and your food and drinks stay cold and safe. A fridge needs power, and that is where a dual battery comes in. A second battery runs the fridge without flattening the one that starts the engine.

Space is tight in a Raptor, so ours sits behind the rear seat. It is a 100Ah lithium battery from Custom Lithium. Lithium is lighter and smaller than the olderAGM battery, and you can drain it lower. Want the fridge running all the time? Mount a solar panel on top of the load lid and it keeps the battery topped up while you are parked. Our 12V auto electrician team wires it in properly, so you do not end up with a rat's nest behind the seat.
Snorkel: Because It’s a Performance Ute
Now for the performance side, because this is a performance ute after all. A 3.0-litre twin-turbocharged V6 petrol engine producing 292kW and 583 Nm of torque. A snorkel lifts your air intake up to roof height, away from dust and water. We fit the Safari ARMAX snorkel made for the next-gen Raptor. It flows about 20% more air than the factory intake, so it is well worth it if you plan on a tune or a better exhaust down the track.

The air ram separates water from the incoming air, so creek crossings and dusty tracks do not become engine problems. It is designed, moulded and made in Australia, with a lifetime warranty. Ford's own race Raptor ran a snorkel on its way to winning the Production 4WD class at the Finke Desert Race, so the idea is well proven on this ute.
Safari or stainless? Some people love the look of a stainless snorkel and happily put up with the noise. In our experience, the Safari is quieter, but it comes down to personal preference.
Best Ranger Raptor Mods for a Heavy Right Foot
Two types of owner need a long range tank. The first is the tourer doing big trips. The second is the bloke with a lead foot who chews through fuel in a Raptor. Either way, the Brown Davis 140 litre steel replacement tank swaps in for the factory tank, so you get more range between servos and no jerry cans on the roof.
Steel is the tougher choice for rough tracks, and Brown Davis recommends it for tourers heading off the beaten track. A full steel tank is a lot of weight, which brings us to the last one.
GVM Upgrade: The Ranger Raptor Mods That Tie It All Together
If you have read this far, you will probably need this one. The load lid, the battery, the fridge, the snorkel and a long range fuel tank all add weight, and that weight eats into your payload. We fit the Lovells Fusion upgrade, which lifts the next-gen Raptor GVM from 3,130kg to 3,550kg. GCM (Gross Combination Mass) also rises from 5,370kg to 5,900kg.

The kit uses heavy duty coil springs front and rear, and they work alongside the factory FOX Live Valve shocks, so the ride stays the way Ford built it. Wheel alignment is included, and it is federally approved for fitting before registration. Already on the road? Some post-registration jobs need extra state engineering, so call us before you book.
Get Your Ranger Raptor Mods Sorted in Brisbane
Together, these Ranger Raptor mods turn a fast ute into a proper tourer. We handle the whole lot at our Geebung workshop, from the Lovells Fusion GVM upgrade to the rest of our 4x4 accessories. Get a quote for your Ranger Raptor mods and let's get your Raptor built.



