Ultimate 200 Series Rear Bar from the Cruiser Company

If you drive a 200 Series LandCruiser and you're serious about off-roading, towing, or touring remote parts of Australia, you know the factory rear end needs some backup. Enter the Cruiser Company 200 Series Rear Bar: a no-compromise, Australian-made solution that’s built to take a hit and keep going.

A proper rear-end setup: dual jerrycan holders on the left and a spare wheel on the right.

Built in Australia to Handle the Toughest Conditions

This isn’t some imported, flimsy knock-off. The Cruiser Company rear bar is designed, tested, and built in Victoria using quality materials like 5mm BluScope Tru-Spec steel and 10mm steel mounting plates. Everything’s braced properly, aligned with precision jigs, and finished in a 3-stage premium satin black powder coat that actually lasts.

Whether you're dragging a camper across the Gibb River Road or crawling rocky high-country trails, this rear bar has been built with clearance, strength, and durability in mind.

Key Features That Set This 200 Series Rear Bar Apart

• Precision Fit: Made specifically for all 200 Series LandCruiser models.

• Heavy-Duty Construction: 5mm steel bar with 10mm mounting plates.

• High Clearance: Engineered to improve departure angles off-road.

• Modular Carriers: Add tyre carriers, jerry holders, BBQ boxes and more, whenever you’re ready.

• 59kg Bar Base Weight: Balanced between strength and sensible weight addition.

• Carriers Included Options: Jerry (22kg), Spare Tyre (19kg), all modular and removable.

The Cruiser Company rear bar is a tough, Aussie-made upgrade for the 200 Series. Installed in-house at BAW Automotive.

Ready To Handle Your Big Trips

You’re not building your 200 Series to look tough at the shops. You want gear that works (and keeps working) when you’re 500km from anywhere, loaded to the hilt and relying on every bit of clearance and strength.

Whether you’re towing up through Cape York or reversing into a tight bush camp with dual spares or jerry cans hanging off the back, the Cruiser Company bar gives you confidence.

Don’t Settle For Less

There are plenty of rear bars on the market - but few that are truly designed for Aussie conditions, made in-house, and built to take a proper beating. This is the best rear bar for the 200 Series LandCruiser if you care about strength, design, and future-proofing your setup.

This rear bar isn’t just for looks – it’s built for clearance, strength, and outback reliability.

Installed Locally by 4WD Specialists in Brisbane

At BAW Automotive, we’re not just resellers. We’re 4WD builders who actually use the gear we fit.

When you bring your Cruiser in for a TCC rear bar installation, you’re dealing with qualified technicians who know how to set your 4x4 up properly - wiring, sensors, lighting and all.

Our Brisbane workshop is fully equipped for rear bar fitouts, dual battery systems, canopies, suspension, and everything else your touring setup needs. We can also combine your rear bar install with a full 12V electrical fitout or GVM upgrade if you’re towing heavy.

Every rear bar is checked before it rolls out. Quality control done right in our Brisbane workshop.

READY TO UPGRADE YOUR 200 SERIES?

If you’re chasing a rear bar that’s built to perform, built to last, and built in Australia, the Cruiser Company 200 Series rear bar is it.

Contact BAW Automotive in Brisbane today to order yours, get it installed properly, and make your Cruiser ready for whatever the outback throws at it.

👉 Book your fitout online to get started.